top of page
Search

Bio-based fixative for artwork

  • panitasi
  • Jan 23
  • 1 min read

Updated: Feb 7

The organic solvent used in the fixative, which is neither water-based nor oil-based, does not damage color pigments or paper. It carries hydrophobic cellulose to form a thin coating film on the paper surface, enhancing the paper’s water resistance.



Suitable for watercolor, charcoal, chalk, acrylic, colored pencils, and graphite


Close-up view of liquid copper being applied to a surface

  • Reduces smudging and dusting

  • Enhances water resistance

  • Does not leave a glossy finish on the artwork surface

  • Dries within 5 minutes


Instructions

1. Shake the bottle before use.

2. Spray the fixative evenly over the paper surface.

3. Let it dry.


  • For thick paper, it is recommended to apply at least 2 coats. Wait until the first coat is completely dry before applying the second coat

  • Before spraying the fixative on the artwork, make sure the colors are completely dry.

  • While spraying, keep a distance of approximately 20 centimeters between the spray nozzle and the paper surface.



 
 
 

Comments

bottom of page